ST-50M-PV2 (500…1200mA 50W)

ST-50M-PV2

LED power supply with adjustable output current & voltage
50 W max., IP20, independent installation
Dimmable with 0-10V, PUSH (primary & secondary)

Electrical Data

Input Voltage	220…240 Vac
Mains Frequency	50/60 Hz
Power Factor (λ)	≥ 0.95 Full Load, 230 Vac
Input Current	0.28 A max.
Output Voltage	68 Vdc max.
Output Current	500 mA constant, 6-60 Vdc, 3-30 W 600 mA constant, 6-60 Vdc, 3,6-36 W 650 mA constant, 6-60 Vdc, 3,9-39 W 700 mA constant, 6-60 Vdc, 4,2-42 W 750 mA constant, 6-60 Vdc, 4,5-45 W 800 mA constant, 6-60 Vdc, 4,8-48 W 850 mA constant, 6-58 Vdc, 5,1-49,3 W 900 mA constant, 6-55 Vdc, 5,4-49,5 W 950 mA constant, 6-52 Vdc, 5,7-49,4 W 1000 mA constant, 6-50 Vdc, 6-50 W 1050 mA constant, 6-47 Vdc, 6,3-49,3 W 1100 mA constant, 6-45 Vdc, 6,6-49,5 W 1200 mA constant, 6-41 Vdc, 7,2-49,2 W
Output Power (nominal)	50 W max.
Effizienz	89% max. Full Load, 230 Vac
Lebensdauer	50.000h Ta Full Load
Dimming mode	0-10V, Primary PUSH, Secondary PUSH
Dimming range	1…100 %

Operating Condition

Operating temperature range (ta)	-25…+50 °C
Max. Surface Temperature (tc)	85 °C
Protection Class	I
Type of Protection	IP20

Protection

(*) The output shuts off and will be resumed, after problem is removed and led driver is restarted.

Standards & Certificates

Installation

Type of Installation	Independent installation
Type of Connection	Spring-loaded terminal
Cable Cross-Section, input side	0.5…1.5 mm²
Cable Cross-Section, output side	0.5…1.5 mm²
Cable Preparation Length, input side	8 mm
Cable Preparation Length, output side	8 mm

Dimension

Connection

Download